The safety valves
/ pressure relief valves
provided by Weldon mainly include spring-loaded safety valve
, pilot-operated safety valve
, bellow balanced safety valve
and changeover valve
(switch device). The calculation sheet could be provided for all projetc and all the safety valves
are designed and manufactured according to API 2000
, API PR520
and API 526
is the safe guard in the pressure vessels
such as chemical plants, eletcric power boilers and gas storage tanks, acting as a protetcion equipment from exploding or damaging. The safety relief valve
is opened automatically to relief when the system pressure exceeds the set pressure, and resumes closed when the system pressure bellow the set pressure.
Size: 1/2 Inch - 24 Inch (DN10 - DN600).
Pressure Rating: Class 150 LB - 2500 LB (0.6 - 42.0 Mpa).
Working Temperature: -196 - 570℃.
Material: Carbon steel, Stainless steel, Alloy steel, including WCB, LCB, LCC, LC1, LC3, CF8, CF8M, CF3, CF3M, WC6, C5, C9, C12, 4A, 5A, MONEL, ALLOY20, C95800, etc.
Connetcion End: Flanged, Thread.
Design & Manufacture Standard: API 520
, API 526
, API 527
Apply To: Power Generation, General Industrial, Oil & Gas, Refining, Petrochemical, Chemical, Urea & Paper, Desalination.
The Pilot-operated safety valves
are composed of a "pilot valve" and a "main valve", differently from spring-loaded safety valves
, the pressure is monitored and adjusted by the pilot valve, not the main valve. Pilot-operated safety valves
are widely used for large size valve and high-pressure applications, which need lager torque and high reliability.
the Principle of pilot operation:
Step 1: THE MAIN VALVE IS CLOSED
When P < 100% of Set Pressure,
The feeding seat of the pilot is open and the main valve’s dome is pressurized.
Step 2: THE MAIN VALVE OPENS
When P =100% of Set Pressure,
The drain seat of the pilot opens and drives the closing of the feeding seat.
Step 3: THE MAIN VALVE STAYS OPEN.
When 95% < P < 110% of Set Pressure,
The drain seat of the pilot stays open and lets dome to the atmosphere.
Step 4: THE MAIN VALVE IS CLOSING.
When P = 95% of Set Pressure,
The drain seat of the pilot recloses and drives the opening of the feeding seat.
Bellow balanced safety valves
are designed to reduce the effetc of back pressure accumulation, the "Bellows
" located between the bonnet and the valve body, where maintained free from the effetc of back pressure, the opposing pressure on the inlet fluid is only generated by the spring without contribution from any sort of backpressure. The space enclosed by bellows is freely vented to air, the back pressure is expetced to be 10 - 50% of the set pressure. The Bellows
can also protetc the spring and other trim components from corrosive media.
Breather amateur.milfs sex toy partys
, also named Pressure/Vacuum Relief amateur.milfs sex toy partys
, available with flanged outlets or vented to atmosphere, are special types of Relief amateur.milfs sex toy partys
which are specifically designed for tank protetcion. Breather amateur.milfs sex toy partys
are usually installed in the in-and out breathing lines of tanks, vessels and process equipment
to prevent the of excessive pressure or vacuum which can unbalance the system or damage the storage vessels
, also called Switch valves
, are designed to connetc two safety valves
to a single pressurized system, acting as the three ways devices for flow seletcion in a pipeline.
Through these Changeover valves
, one of the two safety valves is in operation and ensures the protetcion of the system, the other safety valve is in "stand by" ready to come into operation if the first one must be changed or removed to maintenance. Changeover valves are often required for the continuous production.